2024 Honey Bee ST Grain Belt Swather ST21

Information

2024 Honey Bee ST Grain Belt Swather ST21

Harvest faster while increasing yield

Be the best in your field.

If you’re looking for fast, easy and cost-effective equipment for your farm, then look no further than the ST Grain Belt Swather from Honey Bee. Since it works on tractors with front-wheel assist, there’s no need to purchase a self-propelled windrower.

The ST Grain Belt Swather from Honey Bee is designed to lay a swath that will keep your harvesting equipment working at peak performance, no matter how heavy or light your crop is. Choose from shifting decks that switch between left, right and center delivery, or static decks that deliver from left and right. With control over the number and widths of your swaths, you’ll bale faster and pick up your forage crops more efficiently.

Features may include:

Knife Drive
  • The knife is driven by a 35 /16” (8.4 cm) stroke epicyclic knife drive that operates at 1,400 strokes per minute. The knife drive is driven by a low maintenance hydraulic drive motor. Double knife drive systems are standard equipment on 15', 21', 25', 30' and 36' models.
SCH Cutting System
  • The SCH Easy Cut Cutting System provides smooth, superior cutting. Spring steel guards with cutting edges on top and bottom, along with alternating, bolted, heat-treated sections, eliminate the need for hold downs. The system keeps dirt and debris from accumulating under the knives for increased performance in severe cutting conditions.
Swather Transport
  • The self-contained transport, including hitch, jack and axle, is conveniently stored on the three-point tractor hitch.
Adapter
  • The adapter subframe attaches to the three-point hitch on either the front or rear of the tractor. The PTO-driven pump is integrated into the subframe and is used to power the knife drives and draper belts.

Photos

Highlights

  • Redvers, Saskatchewan
  • 2024
  • Honey Bee
  • ST Grain Belt Swather ST21
  • Available
  • 21' (6.4 m)

Specifications

  • 2024
  • Honey Bee
  • ST Grain Belt Swather
  • ST21
  • General
  • Knife Drive: approximately 1,400 strokes per minute
  • Draper: adjustable from approximately 0 – 575 fpm (175.3 mpm).
  • Hydraulic System: Supplied by Honey Bee Pump
  • Reel(s): 1 - 21′ (6.4 m) | Draper: 42" (106.7 cm) wide rubberized polyester | Single Swath Table: approximately 131cm, or 105cm with end strut gauge wheels | Double Swath Table (deck shift): approximately 146cm in centre delivery, or 121cm with end strut gauge wheels (approximately 118cm each end when shifted for end delivery, or 105cm each end with end strut gauge wheels)
  • 21' (6.4 m)
  • SCH Epicyclic 3 5/16" (8.4 cm) stroke
  • Feed: 45.7 cm x 182.9 cm (18" x 72") | Cross Size Specific: 21′ (6.4 m) (1pc)
  • 4650 lbs (2109 kg)
  • Cutting System: SCH Easy Cut, spring steel guards, bolted sections. | Reel(s): Honey Bee Reel – 6 bat, quick change plastic teeth, multiple spacing. Quick tine adjustment| Knife Drive: hydraulically driven | Centre Deck: Hydraulically driven | Reel Drive: using Tractor Hydraulic System c/w one drive motor. Reel speed adjustable in cab | Header Floatation: Supplied by Honey Bee Leaf Springs | Knife Drive: Double